Land cover, air quality and bathing waters in Denmark
Danish municipalities differ in what covers their land, what is in their air and how many places are designated for bathing. Farmland covers most of the country, the capital area is almost fully built over, and the three themes follow different geographies. This analysis sets land cover, air quality and bathing waters side by side across the 98 municipalities.
What covers the land
In the median municipality, 73.3% of the land is agricultural, 8.5% is forest and 8.1% is artificial surface, according to the land-cover figures for 2018. Farmland reaches 90.8% in Ærø, the highest share in the country, followed by Struer at 88.0% and Morsø at 86.4%.
Forest follows another pattern. Læsø, an island, has 26.6%, the highest share in the country, and Helsingør and Lyngby-Taarbæk, both in Capital Region of Denmark, come next with 23.6% and 23.2%. Next to its 90.8% of farmland, Ærø has only 0.4% of forest.
Wetlands and open natural land are rare in most municipalities but substantial in a few. Wetlands cover 17.4% of Læsø and 15.4% of Fanø, against a median of 1.1%. Open natural land, such as heath and grassland, covers 47.2% of Tårnby and 46.3% of Fanø, the two highest shares, even though Tårnby also has 37.3% artificial surface.
- 1Ærø90.8%
- 2Struer88.0%
- 3Morsø86.4%
- 4Assens86.1%
- 5Samsø86.0%
- 6Lolland85.9%
- 7Nordfyn85.7%
- 8Brønderslev85.6%
- 9Vejen85.0%
- 10Hedensted84.5%
Median across the 98 municipalities: 73.3%
Built over, to different degrees
Two measures describe how much land is built. Artificial surface is a land-cover class that covers the urban fabric as a whole, while the built-up share counts only the land taken by buildings. Artificial surface stands at 100.0% in Frederiksberg, 99.5% in Rødovre and 93.3% in Copenhagen, whereas buildings take up 27.8% of the land of Frederiksberg in 2020, so the two measures can differ widely in a dense city.
The ten highest built-up shares are all in Capital Region of Denmark, led by Frederiksberg at 27.8% and Rødovre at 25.0%. The median is 1.9%.
Space per resident shows the other side of density. Built-up surface per inhabitant is 23 m²/inh. in Frederiksberg and 34 m²/inh. in Copenhagen, the two lowest figures in the country, against 307 m²/inh. in Samsø and 301 m²/inh. in Tønder, the two highest. The median municipality stands at 167 m²/inh. on this measure.
Growth has not been even. On the indicator Increase in built-up surface since 1975, the median municipality stands at 89%, with 130% in Hedensted and 127% in Vejen. The ten smallest increases are all in Capital Region of Denmark, and so are the ten smallest on Increase in built-up surface since 2000.
- 1Samsø307 m²/inh.
- 2Tønder301 m²/inh.
- 3Læsø295 m²/inh.
- 4Varde273 m²/inh.
- 5Lemvig272 m²/inh.
- 6Fanø269 m²/inh.
- 30Odsherred205 m²/inh.
- 89Aarhus86 m²/inh.
- 90Helsingør85 m²/inh.
- 94Lyngby-Taarbæk69 m²/inh.
- 97Copenhagen34 m²/inh.
- 98Frederiksberg23 m²/inh.
Median across the 98 municipalities: 167 m²/inh.
Air quality: traffic, particles and ozone
Nitrogen dioxide is concentrated in the capital region. The annual mean has a median of 3.3 µg/m³ in 2024, and the ten highest values are all in Capital Region of Denmark: Frederiksberg at 12.2 µg/m³, Copenhagen at 9.8 µg/m³ and Rødovre at 8.2 µg/m³. At the other end, Odder has 1.0 µg/m³, the lowest value among the municipalities with data. The figure is not available for every municipality.
Fine particles tell another story. The indicator Fine particles PM2.5 (annual mean) has a median of 6.5 µg/m³, and the three highest values are all in Southern Denmark, led by Aabenraa at 7.5 µg/m³. The capital does not stand out: Copenhagen has 6.7 µg/m³ and is ranked 22 of 98. The lowest value, 4.5 µg/m³, is found in Læsø.
Ozone runs the other way. The three highest values of Ozone O₃ (93.2nd percentile of daily maximum 8-hour means) are all in Southern Denmark, and Fanø comes first with 108 µg/m³. Copenhagen has 99 µg/m³ and Frederiksberg 99 µg/m³, against a median of 102 µg/m³. Traffic emissions can break ozone down, which may be part of the explanation, but the figures cannot confirm it.
- 1Frederiksberg12.2 µg/m³
- 2Copenhagen9.8 µg/m³
- 3Rødovre8.2 µg/m³
- 4Gentofte7.8 µg/m³
- 4Gladsaxe7.8 µg/m³
- 6Herlev7.2 µg/m³
- 7Glostrup7.0 µg/m³
- 8Ballerup6.8 µg/m³
- 8Brøndby6.8 µg/m³
- 10Hvidovre6.2 µg/m³
Median across the 87 municipalities: 3.3 µg/m³
Bathing waters by the coast and by the lake
The number of designated bathing waters has a median of 9 per municipality in 2025. Odsherred has 33, followed by Kalundborg with 29 and Aabenraa with 27. The count is 0 in Frederiksberg, Rødovre and Høje-Taastrup in the capital area, and also in Billund and Favrskov.
Lakes add a different geography. The three municipalities with the most bathing waters on lakes are all in Central Denmark Region: Silkeborg with 17, Skanderborg with 15 and Viborg with 11. In Silkeborg the 17 lake waters are also the whole of its 17 designated waters.
Quality ratings are high where waters exist. The median share rated excellent is 100% and the median share rated sufficient or poor is 0%. A few municipalities fall outside that pattern, with 14% in Næstved, 14% in Viborg and 11% in Herning. These shares rest on few waters, as Næstved has 7 designated waters, so a single rating moves the share a lot.
Reading the three together
The three themes do not line up. Aabenraa has the highest fine-particle value in the country and also the second most bathing waters rated excellent, with 27, and it is ranked 6 of 98 for ozone. The capital is not cut off from the water either: Copenhagen has 19 designated bathing waters, 17 of them rated excellent.
Land and air do go together in one respect. Frederiksberg has the highest built-up share, 27.8%, and the highest nitrogen dioxide value, 12.2 µg/m³, which fits the idea that this pollutant follows density. The ten highest built-up shares and the ten highest nitrogen dioxide values are all in Capital Region of Denmark. Fine particles and ozone have a different geography, as shown above.
Each measure also has its own vintage, with land cover for 2018, built-up land for 2020, air quality for 2024 and bathing waters for 2025, so a municipality can change faster than the figures show.
Key takeaways
- Farmland covers a median of 73.3% of a municipality and reaches 90.8% in Ærø.
- The ten highest values of nitrogen dioxide are all in Capital Region of Denmark. Fine particles tell another story, as Copenhagen is ranked 22 of 98.
- Built-up surface per inhabitant is 23 m²/inh. in Frederiksberg, against 307 m²/inh. in Samsø.
- The number of designated bathing waters is 33 in Odsherred and 0 in Frederiksberg.
- Aabenraa combines the highest fine-particle value with the second most bathing waters rated excellent.