Wind, sun and the geography of Danish power
Electricity in Denmark is made in some places and used in others. This analysis sets installed wind and solar capacity next to the share of consumption covered by local renewable energy and the appetite of cities, resorts and industrial towns, to show how unevenly the 98 municipalities are placed in the energy system.
Turbines on the coasts and the islands
Wind capacity is measured here in kilowatts per inhabitant, onshore and offshore together, which favours places with large installations and few residents. The median municipality stands at 0.43 kW per inh., but the leaders are in another league: Lemvig reaches 21.61 kW per inh., Lolland 16.52 kW per inh. and Vordingborg 13.89 kW per inh., in that order.
Totals and per-head figures give different leaders. Onshore, Ringkøbing-Skjern has the largest installed capacity, at 516.5 MW. Per inhabitant it is ranked 5 of 98, at 12.35 kW per inh., since its turbines are spread across a sizeable population.
Offshore turbines change the picture for small places. Samsø has only 11.0 MW of onshore capacity, yet 9.44 kW per inh. once turbines at sea are counted. The island is ranked 6 of 98 on that measure.
At the other end of the table the figures fall to zero: Rudersdal has 0.00 kW per inh., Lyngby-Taarbæk 0.00 kW per inh. and Frederiksberg 0.00 kW per inh., in a long list of places with no installed turbines. Across Capital Region of Denmark, onshore capacity adds up to 65.7 MW for 1,947,120 residents, against 1,929 MW for 1,383,261 residents in Central Denmark Region.
- 1Lemvig21.61 kW per inh.
- 2Lolland16.52 kW per inh.
- 3Vordingborg13.89 kW per inh.
- 4Norddjurs12.51 kW per inh.
- 5Ringkøbing-Skjern12.35 kW per inh.
- 6Samsø9.44 kW per inh.
- 7Esbjerg7.46 kW per inh.
- 8Jammerbugt5.75 kW per inh.
- 9Thisted5.14 kW per inh.
- 10Tønder4.80 kW per inh.
Median across the 98 municipalities: 0.43 kW per inh.
Solar: many roofs, a few large parks
Solar capacity has a geography of its own, although it overlaps with wind. While the median municipality stands at 0.44 kW per inh., Lolland reaches 7.85 kW per inh., Lemvig 7.19 kW per inh. and Vejen 6.23 kW per inh., in that order. Two places appear at the head of both rankings: Lolland (solar: ranked 1 of 98; wind: ranked 2 of 98) and Lemvig (solar: ranked 2 of 98; wind: ranked 1 of 98).
Counting installations instead of capacity tells another story. On the indicator Solar installations per 1,000 inhabitants, Samsø stands at 108.9 ‰ and Læsø at 108.1 ‰. Yet Samsø has only 2.8 MW of solar capacity in total, and is ranked 94 of 98 on that measure. Aabenraa is the opposite case: its installations stand at 43.4 ‰, close to the median of 39.2 ‰, yet its total capacity of 358.4 MW is ranked 1 of 98.
The two measures answer different questions: one counts systems, the other adds up their size. A few large installations can outweigh many rooftop systems.
Solar capacity is scarce in the capital's region. Frederiksberg has 0.03 kW per inh., Copenhagen has 0.05 kW per inh. and Gentofte has 0.09 kW per inh., and the ten lowest values in the country are all found in Capital Region of Denmark. Flats make up 92.1% of homes in Frederiksberg and 89.6% in Copenhagen, which leaves limited roof and land per resident.
- 1Samsø108.9 ‰
- 2Læsø108.1 ‰
- 4Thisted66.1 ‰
- 6Lemvig64.8 ‰
- 21Vejen49.4 ‰
- 36Aabenraa43.4 ‰
- 55Lolland37.2 ‰
- 93Odense13.6 ‰
- 96Gentofte8.0 ‰
- 97Copenhagen3.1 ‰
- 98Frederiksberg1.5 ‰
Median across the 98 municipalities: 39.2 ‰
How much demand is met by local renewables
One indicator compares local renewable generation with the electricity used in the same municipality. The median municipality covers 20.3% of its consumption, but Lemvig reaches 93.6%, with Lolland at 88.5% and Randers at 87.1%.
A high score is not reserved for sparsely populated places. Randers, a municipality of 100,564 residents, reaches 87.1% on this measure.
The hourly version of the indicator is sharper. It counts the hours of the year when local renewable energy covers all of the municipality's electricity use. In the median municipality that happens during only 0.6% of the year's hours, while Lemvig reaches 86.5%.
The reading needs care. The figures compare generation inside municipal borders with consumption inside the same borders, while electricity moves across a shared grid. A low value does not mean a lack of renewable power in the system, only that the municipality's own plants cover little of its own demand. Fredericia shows how far this can go: its local renewables cover 0.0% of consumption, which stands at 13,186 kWh per inh., in a municipality with 455.4 MW of thermal power plant capacity.
- 1Lemvig93.6%
- 2Lolland88.5%
- 3Randers87.1%
- 4Ringkøbing-Skjern84.2%
- 5Jammerbugt83.7%
- 6Samsø81.0%
- 7Thisted79.7%
- 8Herning77.0%
- 9Vesthimmerland74.5%
- 10Holstebro74.2%
Median across the 98 municipalities: 20.3%
Industry, power stations and holiday homes
Households account for a modest part of electricity use. In the median municipality homes use 1,891 kWh per inh., against 6,160 kWh per inh. for all consumers together, and Kalundborg stands at 17,925 kWh per inh. on the same basis of all consumers.
Industry goes a long way toward explaining the highest values. Kalundborg is first for industrial energy use per inhabitant, at 251.4 GJ per inh., and first for electricity consumption, at 17,925 kWh per inh., a combination that points to a heavy industrial base. Fredericia is second on industrial use (147.9 GJ per inh.).
Thermal power plants are counted where they stand and not where the electricity is used, so they are concentrated in a few places. Installed capacity reaches 824.1 MW in Hvidovre and 531.1 MW in Odense, against 339.9 MW in Copenhagen.
Household use is the part tied to everyday life, and holiday homes shape it. The indicator includes them, so Fanø reaches 5,286 kWh per inh. and Læsø 4,617 kWh per inh., against 740 kWh per inh. in Copenhagen.
Producers, hubs and consumers
Taken together, the indicators sketch three kinds of place. Producers combine large wind or solar capacity with a small population and cover most of their own electricity use. They are found in Central Denmark Region, North Denmark Region, Southern Denmark and Region Zealand. Hubs host power stations or heavy industry and consume far more than their renewables supply. Cities and their suburbs generate little within their borders and use little per head.
These indicators measure capacity and counts, not output. A wind turbine or a solar panel produces electricity only when the wind blows or the sun shines, and capacity says nothing about how much was generated in a given year or how it was used. The coverage measures come closest to output, but they stop at the municipal border.
Read this way, the energy map of Denmark is less a question of size than of function: some municipalities host the plants, others host the demand.
Key takeaways
- Lemvig has the highest wind capacity per inhabitant, at 21.61 kW per inh., against a median of 0.43 kW per inh. across the municipalities.
- Solar looks different by installations and by capacity: Samsø stands at 108.9 ‰ but has only 2.8 MW in total.
- Local renewables cover 20.3% of electricity use in the median municipality, and 93.6% in Lemvig.
- Fredericia combines 0.0% of local coverage with consumption of 13,186 kWh per inh., which shows how much industry and power plants shape the figures.
- Capacity is not output: the figures describe what is installed, not what was generated.